bin

bin/.bin/0x0

@@ -0,0 +1,4 @@
+#!/bin/bash
+
+curl -F"file=@$@" https://0x0.st | tee >(xclip -sel clip)
+

bin/.bin/disc

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+tmux ls -F \#S | grep disc && \
+	tmux attach -t disc \
+|| \
+	tmux new-session -s disc 'scli --save-history' \; \
+		split-window -h -l 75% 'aerc' \; \
+		split-window -v 'weechat' \; \

bin/.bin/emailbook

@@ -0,0 +1,141 @@
+#!/bin/sh
+VERSION="0.2.1"
+usage() {
+    echo "emailbook $VERSION"'
+A minimalistic address book for e-mails only.
+
+Usage: emailbook FILE [OPTIONS]
+
+Prints all values in FILE if no option is given.
+
+Options:
+-a, --add [KEY] VALUE  Add KEY/VALUE pair to FILE. If KEY is omitted,
+                       VALUE is used as key, too.
+[-s, --search] QUERY   Search FILE for entries with keys or values containing QUERY.
+-k, --key QUERY        Like `--search` but limit search to keys/aliases.
+-v, --value QUERY      Like `--search` but limit search to values.
+-p, --parse SOURCE     Parse stdin for e-mail addresses in header and add them to FILE.
+                       SOURCE might be either --from, --to , --cc, --bcc, or --all.
+-h, --help             Show this help.
+-V, --version          Print version.
+'
+}
+
+checkfilename() {
+    [ $QUIET ] || [ -e "$filename" ] \
+        || echo "File $filename not found. Creating it." 1>&2
+}
+
+keyexists() {
+    escaped=$(echo "$*" | sed 's/[][\.|$(){}?+*^]/\\&/g')
+    # also check display name with/without double quotes
+    quotestoggled=$(echo "$*" | sed -E 's/^"([^"]+)"( +<[^>]+>)/\1\2/;t;s/^([^"]+?)( +<[^>]+>)/"\1"\2/')
+    quotestoggledescaped=$(echo "$quotestoggled" | sed 's/[][\.|$(){}?+*^]/\\&/g')
+    grep -q -E "^$escaped( :|\$)" "$filename" 2> /dev/null \
+        || grep -q -E "^$quotestoggledescaped( :|\$)" "$filename" 2> /dev/null
+}
+
+addentry() {
+    if keyexists "$1"; then
+        [ $QUIET ] || echo "! $1 (skipped)"
+    else
+        [ "$2" ] && line="$1 : $2" || line="$1"
+        [ $QUIET ] || echo "+ $line"
+        echo "$line" >> "$filename"
+    fi
+}
+
+add() {
+    checkfilename
+    case $# in
+    1|2) addentry "$@" ;;
+    *) echo "Expected one or two arguments after -a!"; exit 1 ;;
+    esac
+}
+
+addfromstdin() {
+    # Skip lines without "@", skip lines containing no-reply (or similar),
+    # strip \r, strip leading spaces, do the following replacements:
+    # "'John Doe'" <xxx> → "John Doe" <xxx>
+    # 'John Doe' <xxx> → John Doe <xxx>
+    # "john.doe@example.com" <john.doe@example.com> → <john.doe@example.com>
+    # "<john.doe@example.com>" <john.doe@example.com> → <john.doe@example.com>
+    # john.doe@example.com → <john.doe@example.com>
+    grep '@' \
+        | grep -v -i -E '\bnot?[_-]?reply' \
+        | sed 's/\r$//' \
+        | sed -E 's/^ +//g' \
+        | sed -E "s/(\"?)'([^'\"]+)'(\"?)/\1\2\3/" \
+        | sed -E 's/^"<?([^">]*)>?" +<\1>/<\1>/' \
+        | sed -E 's/^[^<>@ ]*@[^<>@ ]+$/<\0>/' \
+        | sort -u \
+        | while read -r line; do addentry "$line"; done
+}
+
+searchall() {
+    # show entries with matching alias first
+    searchbyalias "$*"
+    searchbyvalueonly "$*"
+}
+
+searchbyalias() {
+    grep -i -E "$* :" "$filename" | sed -E 's/^[^:]+:\s*//'
+}
+
+searchbyvalue() {
+    sed -E 's/^[^:]+:\s*//' "$filename" | grep -i -E "$*"
+}
+
+searchbyvalueonly() {
+    # exclude matches found by searchbyalias
+    grep -i -E -v "$* :" "$filename" | sed -E 's/^[^:]+:\s*//' | grep -i -E "$*"
+}
+
+parsefields() {
+    # Find header fields starting with $1 (p.e. 'To:') plus following lines
+    # starting with a space. Split entries at commas except when quoted. Skip
+    # empty lines. Decode encoded strings. Squeeze double spaces.
+    sed -E '/^\r?$/Q' - \
+        | sed -E -n "/^$1:/{:a ; \$!N ; s/\n\s+/ / ; ta ; P ; D}" \
+        | sed -E "s/^$1:\\s*//" \
+        | grep -v -P '[\x80-\xFF]' \
+        | awk -vFPAT='([^,"]*)("[^"]+")?([^,]*)?' -vOFS='\n' \
+          '{for(i=1;i<=NF;i++) printf("%s\n",$i)}' \
+        | sed -E -e '/^ *$/d' \
+        | perl -CS -MEncode -ne 'print decode("MIME-Header", $_)' \
+        | sed -E -e 's/  +/ /g' \
+        | addfromstdin
+}
+
+parse() {
+    checkfilename
+    case "$1" in
+    --all)  parsefields '(From|To|Cc|CC|Bcc)' ;;
+    # TODO: Include References, In-Reply-To, Reply-To, Return-Path?
+    --from) parsefields 'From' ;;
+    --to)   parsefields 'To' ;;
+    --cc)   parsefields '(Cc|CC)' ;;
+    --bcc)  parsefields 'Bcc' ;;
+    esac
+}
+
+
+case "$1" in
+-h|--help|'') usage; exit ;;
+-V|--version) echo "$VERSION"; exit ;;
+esac
+
+filename="$1"; shift
+
+case "$1" in
+-q|--quiet) shift; QUIET=1 ;;
+esac
+
+case "$1" in
+-a|--add)     shift; add "$@" ;;
+-s|--search)  shift; searchall "$*" ;;
+-k|--key)     shift; searchbyalias "$*" ;;
+-v|--value)   shift; searchbyvalue "$*" ;;
+-p|--parse)   shift; parse "$@" ;;
+*)            searchall "$*" ;;
+esac

bin/.config/emoji

@@ -1355,6 +1355,7 @@
 🈺 Japanese “open for business” button; U+1F23A
 🈵 Japanese “no vacancy” button; U+1F235
 🔴 red circle; U+1F534
+🟢 green circle; U+1F7E2
 🔵 blue circle; U+1F535
 ⚪ white circle; U+26AA
 ⚫ black circle; U+26AB

bspwm/.config/bspwm/bspwmrc

@@ -98,6 +98,8 @@ bspc rule -a Zathura state=tiled
 bspc rule -a arduino state=pseudo_tiled
 bspc rule -a Spotify desktop=VII follow=off focus=off
 bspc rule -a discord desktop=VII follow=off focus=off
+bspc rule -a steam_app_2666510 state=pseudo_tiled split_dir=south split_ratio 340 locked private layer=above rectangle=1920x340+0+740
+#bspc rule -a steam_app_2666510 state=pseudo_tiling locked=on private=on split_dir=south split_ratio 296 layer=above rectangle=1920x296+0+784
 
 ##  Autogap adjusts windowgap automatically according to the number of
 ##  windows on the desktop. Using it disables negative window gap.

dunst/.config/dunst/dunstrc

@@ -0,0 +1,258 @@
+[global]
+
+font =Fira Code 14
+
+# Allow a small subset of html markup:
+#   <b>bold</b>
+#   <i>italic</i>
+#   <s>strikethrough</s>
+#   <u>underline</u>
+#
+# For a complete reference see
+# <http://developer.gnome.org/pango/stable/PangoMarkupFormat.html>.
+# If markup is not allowed, those tags will be stripped out of the
+# message.
+markup = yes
+plain_text = no
+
+# The format of the message.  Possible variables are:
+#   %a  appname
+#   %s  summary
+#   %b  body
+#   %i  iconname (including its path)
+#   %I  iconname (without its path)
+#   %p  progress value if set ([  0%] to [100%]) or nothing
+# Markup is allowed
+format = "<b>%s</b>\n%b"
+
+# Sort messages by urgency.
+sort = no
+
+# Show how many messages are currently hidden (because of geometry).
+indicate_hidden = yes
+
+# Alignment of message text.
+# Possible values are "left", "center" and "right".
+alignment = center
+
+# The frequency with wich text that is longer than the notification
+# window allows bounces back and forth.
+# This option conflicts with "word_wrap".
+# Set to 0 to disable.
+bounce_freq = 0
+
+# Show age of message if message is older than show_age_threshold
+# seconds.
+# Set to -1 to disable.
+show_age_threshold = -1
+
+# Split notifications into multiple lines if they don't fit into
+# geometry.
+word_wrap = yes
+
+# Ignore newlines '\n' in notifications.
+ignore_newline = no
+
+# Hide duplicate's count and stack them
+stack_duplicates = yes
+hide_duplicates_count = yes
+
+
+# The geometry of the window:
+#   [{width}]x{height}[+/-{x}+/-{y}]
+# The geometry of the message window.
+# The height is measured in number of notifications everything else
+# in pixels.  If the width is omitted but the height is given
+# ("-geometry x2"), the message window expands over the whole screen
+# (dmenu-like).  If width is 0, the window expands to the longest
+# message displayed.  A positive x is measured from the left, a
+# negative from the right side of the screen.  Y is measured from
+# the top and down respectevly.
+# The width can be negative.  In this case the actual width is the
+# screen width minus the width defined in within the geometry option.
+#geometry = "250x50-40+40"
+geometry = "300x50-15+49"
+
+# Shrink window if it's smaller than the width.  Will be ignored if
+# width is 0.
+shrink = no
+
+# The transparency of the window.  Range: [0; 100].
+# This option will only work if a compositing windowmanager is
+# present (e.g. xcompmgr, compiz, etc.).
+transparency = 5 
+
+# Don't remove messages, if the user is idle (no mouse or keyboard input)
+# for longer than idle_threshold seconds.
+# Set to 0 to disable.
+idle_threshold = 0
+
+# Which monitor should the notifications be displayed on.
+monitor = 1
+
+# Display notification on focused monitor.  Possible modes are:
+#   mouse: follow mouse pointer
+#   keyboard: follow window with keyboard focus
+#   none: don't follow anything
+#
+# "keyboard" needs a windowmanager that exports the
+# _NET_ACTIVE_WINDOW property.
+# This should be the case for almost all modern windowmanagers.
+#
+# If this option is set to mouse or keyboard, the monitor option
+# will be ignored.
+follow = none
+
+# Should a notification popped up from history be sticky or timeout
+# as if it would normally do.
+sticky_history = yes
+
+# Maximum amount of notifications kept in history
+history_length = 15
+
+# Display indicators for URLs (U) and actions (A).
+show_indicators = no
+
+# The height of a single line.  If the height is smaller than the
+# font height, it will get raised to the font height.
+# This adds empty space above and under the text.
+line_height = 3
+
+# Draw a line of "separatpr_height" pixel height between two
+# notifications.
+# Set to 0 to disable.
+separator_height = 2
+
+# Padding between text and separator.
+padding = 6
+
+# Horizontal padding.
+horizontal_padding = 6
+
+# Define a color for the separator.
+# possible values are:
+#  * auto: dunst tries to find a color fitting to the background;
+#  * foreground: use the same color as the foreground;
+#  * frame: use the same color as the frame;
+#  * anything else will be interpreted as a X color.
+separator_color = auto
+
+# Print a notification on startup.
+# This is mainly for error detection, since dbus (re-)starts dunst
+# automatically after a crash.
+startup_notification = false
+
+# dmenu path.
+dmenu = /usr/bin/dmenu -p dunst:
+
+# Browser for opening urls in context menu.
+browser = /usr/bin/qutebrowser -t 
+
+# Align icons left/right/off
+icon_position = off
+max_icon_size = 80
+
+# Paths to default icons.
+icon_path = /usr/share/icons/Paper/16x16/mimetypes/:/usr/share/icons/Paper/48x48/status/:/usr/share/icons/Paper/16x16/devices/:/usr/share/icons/Paper/48x48/notifications/:/usr/share/icons/Paper/48x48/emblems/
+
+frame_width = 1
+frame_color = "#8EC07C"
+
+[shortcuts]
+
+# Shortcuts are specified as [modifier+][modifier+]...key
+# Available modifiers are "ctrl", "mod1" (the alt-key), "mod2",
+# "mod3" and "mod4" (windows-key).
+# Xev might be helpful to find names for keys.
+
+# Close notification.
+close = ctrl+space
+
+# Close all notifications.
+close_all = ctrl+shift+space
+
+# Redisplay last message(s).
+# On the US keyboard layout "grave" is normally above TAB and left
+# of "1".
+history = ctrl+grave
+
+# Context menu.
+context = ctrl+shift+period
+
+[urgency_low]
+# IMPORTANT: colors have to be defined in quotation marks.
+# Otherwise the "#" and following would be interpreted as a comment.
+frame_color = "#3B7C87"
+foreground = "#3B7C87"
+background = "#191311"
+#background = "#2B313C"
+timeout = 4
+
+[urgency_normal]
+frame_color = "#5B8234"
+foreground = "#5B8234"
+background = "#191311"
+#background = "#2B313C"
+timeout = 6
+
+[urgency_critical]
+frame_color = "#B7472A"
+foreground = "#B7472A"
+background = "#191311"
+#background = "#2B313C"
+timeout = 8
+
+
+# Every section that isn't one of the above is interpreted as a rules to
+# override settings for certain messages.
+# Messages can be matched by "appname", "summary", "body", "icon", "category",
+# "msg_urgency" and you can override the "timeout", "urgency", "foreground",
+# "background", "new_icon" and "format".
+# Shell-like globbing will get expanded.
+#
+# SCRIPTING
+# You can specify a script that gets run when the rule matches by
+# setting the "script" option.
+# The script will be called as follows:
+#   script appname summary body icon urgency
+# where urgency can be "LOW", "NORMAL" or "CRITICAL".
+#
+# NOTE: if you don't want a notification to be displayed, set the format
+# to "".
+# NOTE: It might be helpful to run dunst -print in a terminal in order
+# to find fitting options for rules.
+
+#[espeak]
+#    summary = "*"
+#    script = dunst_espeak.sh
+
+#[script-test]
+#    summary = "*script*"
+#    script = dunst_test.sh
+
+#[ignore]
+#    # This notification will not be displayed
+#    summary = "foobar"
+#    format = ""
+
+#[signed_on]
+#    appname = Pidgin
+#    summary = "*signed on*"
+#    urgency = low
+#
+#[signed_off]
+#    appname = Pidgin
+#    summary = *signed off*
+#    urgency = low
+#
+#[says]
+#    appname = Pidgin
+#    summary = *says*
+#    urgency = critical
+#
+#[twitter]
+#    appname = Pidgin
+#    summary = *twitter.com*
+#    urgency = normal
+#
+# vim: ft=cfg

git/.gitconfig

@@ -1,6 +1,6 @@
 [user]
-	email = debucquoy.anthony@gmail.com
-	name = Anthony Debucquoy
+	email = tonitch@herisson.ovh
+	name = tonitch
 	signingkey = 3D06B2E67463D272D769DF59A78D6421F083D42E
 [init]
 	defaultBranch = master
@@ -17,3 +17,10 @@
 	fap = fetch --all --prune
 [push]
 	autoSetupRemote = true
+[sendemail]
+	smtpServer = mail.herisson.ovh
+	smtpEncryption = tls
+	smtpServerPort = 587
+	smtpUser = tonitch
+	smtpPass = bateaux
+	annotate = yes

nvim/.config/nvim/plugin/lsp.lua

@@ -21,4 +21,7 @@ do
   vim.keymap.set('i', '<C-S>', function()
     vim.lsp.buf.signature_help()
   end, { desc = 'vim.lsp.buf.signature_help()' })
+
+  vim.keymap.set('n', ']g', vim.diagnostic.goto_next)
+  vim.keymap.set('n', '[g', vim.diagnostic.goto_prev)
 end

picom/.config/picom/picom.conf

@@ -1,5 +1,8 @@
 active-opacity = 1.0;
 inactive-opacity = 0.9;
+backend = "glx";
+shadow = true;
+corner-radius = 10;
 
 opacity-rule = [
 	"100:name ~?= 'YouTube — Mozilla Firefox'",
@@ -7,3 +10,8 @@ opacity-rule = [
 	"100:name ~?= 'Netflix — Mozilla Firefox'",
 	"100:class_g = 'Zathura'"
 ]
+
+animation = ({
+		triggers = ["open", "close"];
+		preset = "appear";
+		})

stowed.list

@@ -1,6 +1,7 @@
 bin
 bspwm
 dmenu
+dunst
 feh
 git
 nvim

sxhkd/.config/sxhkd/sxhkdrc

@@ -192,7 +192,8 @@ super + shift + {comma,period}
 # Change window gap
 
 super + g
-	bspc config -d focused window_gap {$gap,$(($gap+$cgap)),$(($gap+$cgap+$gap))}
+	{bspc config window_gap 0 && bspc config top_padding 0 && bspc config bottom_padding 0 && bspc config right_padding 0 && bspc config left_padding 0,\
+	bspc config window_gap $(($gap+$cgap)) && bspc config top_padding $(($PANEL_HEIGHT-($gap-$cgap))) && bspc config bottom_padding -$gap && bspc config right_padding -$gap && bspc config left_padding -$gap}
 
 super + button{4,5}
 	bspc config -d focused window_gap $((`bspc config -d focused window_gap` {+,-} 2 ))

tmux/.config/tmux/tmux.conf

@@ -1,5 +1,6 @@
 set -g mouse
 set -g set-clipboard on
+set -g focus-events on
 
 bind h selectp -L 
 bind j selectp -D 

vim/.vim/UltiSnips/make.snippets

@@ -20,10 +20,14 @@ $0
 clean: 
 	rm -f *.o
 	rm -f $1 
+	rm -f tags compile_commands.json
 
 bear: clean
 	bear -- make
 
+tags: 
+	ctags **.{c,h}
+
 run: $1 
 	./$<
 

vim/.vim/ftplugin/go.vim

@@ -1,3 +1,2 @@
 set keywordprg=go\ doc
-unmap K
 set makeprg=go\ run\ .

zsh/.zshrc

@@ -72,6 +72,7 @@ alias open="xdg-open"
 alias sxiv=nsxiv
 alias :q=exit
 alias vim=nvim
+alias radio="mpv https://radio.freenode.net/radio.ogg --volume=30" 
 
 # Theming section  
 autoload -U compinit colors zcalc